1、Resin and glass fibre are to the polyester membrane Discharge (A platform ) on the (lower floor membrane ).
2、The resin , promoter and solidification pharmaceutical pass the proportion pump, Enter the mixing device after being measured accurately, The resin after mixing evenly drops on the in short lower floor membrane, The quantity of discharging of the resin is controlled by the adjustable scraper.
3、Cut the fibre felt to pave on the resin floor at the same time short , soak the glue , and flood the course with higher speed through a heating area (B platform ). Top put one polyester membrane or defend aging membrane, glass fibre and resin layer of upper and lower membrane so make up a intermediate layer lead, its thickness can be controlled.
4、Intermediate layer is it take shape the wave form required through mould to carry, then enter the solidification stove , from heat exchanger hot air and intermediate layer bring one's own heat that solidification let, make the intermediate layer lead and solidify and finalize the design.
5、Solidification corrugated tile on after not leaving heating furnace under air it cool,on, put membrane can opening and roll instead , can one glue it at the board directly instead too.
6、The corrugated tile of solidification enters the system of cutting through drawing, by sawing the width of cutting the demand at first, and then saw and cut certain length from end. Adopting water to cool the saw and combine dust removal while cutting, water and thick liquid with dust are discharged after precipitating the deep water of the pool to precipitate.
7.Control function
    a , according to production technological requirement , adjustable proportion pump , make various kinds of raw materials automatic matching of proportion on request.
    B, temperature of soaking the glue platform can be regulated automatically and by hand, make it meet production demand .
    C, stove body every district temperature can be regulated automatically and by hand, through regulating the electric heater, enable every district temperature to meet the production demand .
    D , drawing the speed adjustably according to the technological requirement of production.
    E , adjusting the speed of cutting, makes it in conformity with speed of production. Require , adjustable to cut speed according to production. This production line or handle by hand by the automatic control system, so as to ensure the normal operation of production.
二、main performance of production line:
1, Appearance measurement of the production line : The type in common use is 61. 6m*4m*3.Whether 75m
2 , line total installation power. 112KW
3 , power consumption of production line that electricity is heated: Electricity is heated 0. 23 degrees / m2 ,
4 , production line consume water: 0. 01m3/m2
5, ability to produce line top great production: 650,000m2 / annual
6 , production line draws the speed the most largly: Whether 4m / person who divide into
7,production line can produce line
8 panel , produce the product specification. Thickness 0. 3-3. Whether 0mm , width 350500mm , crest high 130mm
9 , produce the post staff. 10 for 6-8 people , produce the products and colour random advantages and can be divided into: Transparent type , semitransparent type , fire-retardant type , ordinary type, it is up to 90% to defend the wearing out type , printing opacity rate.
三、Install, debug, technological service
There are specialized technical staff and is responsible for guidance to install in our company, the equipment is debugged, train post person , maintains to a technical staff , teaches the production technology and manufacturing technology of the mould and offers relevant service manuals.
四、After-sale service
One year such as duration of insurance such as quality such as production line users needed to use under the technological terms that the equipment stipulate .
五、Production cycle
40 days production cycle.